| 产品特性：耐高温 | 是否进口：否 | 产地：美国 |
| 厂家(产地)：美国塞拉尼斯 | 牌号：7130 | 销售方式：品牌经销 |
| 类型：标准料 | 品名：LCP | 加工级别：注塑级 |
| 特性级别：阻燃级、 增韧级、 耐高温、 标准级、 高抗冲 | 用途级别：汽车部件、 电子电器部件 | 品牌：塞拉尼斯 |
| 产品规格：30%玻纤 V0阻燃 |
现货供应LCP 7130塞拉尼斯（原美国杜邦，泰科纳）抗冲击耐热LCP塑胶原料防火V0，含30%玻璃纤维增强，优良的韧性，耐冲击性好，经润滑，高耐热，热变形温度310℃，用于汽车、电气电子、电信、航空航天等。
LCP 7130物性表：
Zenite? 7130 is a 30% glass fiber reinforced liquid crystal polymer for injection molding. It has excellent impact resistance and excellent heat deflection temperature. | |
| General | |
Material Status |
|
Availability | Africa & Middle EastAsia PacificEuropeLatin AmericaNorth America |
Filler / Reinforcement |
|
Additive |
|
Features | Flame RetardantGood Heat ResistanceHigh Flow |
Processing Method | Injection MoldingLead Free Soldering |
| ASTM & *** Properties 1 | |||
| Physical | Nominal Value | Unit | Test Method |
Density | 1.62 | g/cm? | *** 1183 |
Molding Shrinkage | *** 294-4 | ||
Across Flow | 0.60 | % | |
Flow | 0.0 | % | |
| Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus | 17000 | MPa | *** 527-1 |
Tensile Stress (Break) | 150 | MPa | *** 527-2/5 |
Tensile Strain (Break) | 1.5 | % | *** 527-2/5 |
Flexural Modulus (23°C) | 16500 | MPa | *** 178 |
Flexural Stress (23°C) | 210 | MPa | *** 178 |
| Impact | Nominal Value | Unit | Test Method |
Charpy Notched Impact Strength | *** 179/1eA | ||
-30°C | 20 | kJ/m? | |
23°C | 20 | kJ/m? | |
Charpy Unnotched Impact Strength | *** 179/1eU | ||
-30°C | 22 | kJ/m? | |
23°C | 30 | kJ/m? | |
Notched Izod Impact Strength (23°C) | 18 | kJ/m? | *** 180/1A |
Unnotched Izod Impact Strength (23°C) | 30 | kJ/m? | *** 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (1.8 MPa, Unannealed) | 310 | °C | *** 75-2/A |
Glass Transition Temperature 2 | 120 | °C | *** 11357-2 |
Melting Temperature 2 | 352 | °C | *** 11357-3 |
CLTE - Flow | 3.0E-6 | cm/cm/°C | *** 11359-2 |
CLTE - Transverse | 6.2E-5 | cm/cm/°C | *** 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
Surface Resistivity (23°C) | > 1.0E+15 | ohms | IEC 62631-3-2 |
Volume Resistivity (23°C) | > 1.0E+13 | ohms·m | IEC 62631-3-1 |
Electric Strength 3 (23°C) | 45 | kV/mm | IEC 60243-1 |
Dielectric Constant | IEC 60250 | ||
100 Hz | 4.10 | ||
1 MHz | 3.70 | ||
Dissipation Factor | IEC 60250 | ||
100 Hz | 0.014 | ||
1 MHz | 0.030 | ||
Comparative Tracking Index (CTI) | PLC 4 | UL 746A | |
| Flammability | Nominal Value | Unit | Test Method |
Flame Rating (0.40 mm) | V-0 | UL 94 | |
Oxygen Index | 45 | % | *** 4589-2 |
| Processing Information | |||
| Injection | Nominal Value | Unit | |
Drying Temperature | > 150 | °C | |
Drying Time | 3.0 | hr | |
Suggested Max Moisture | 0.010 | % | |
Hopper Temperature | 20 to 30 | °C | |
Injection Feed Temperature | 40 to 60 | °C | |
Rear Temperature | 355 to 365 | °C | |
Middle Temperature | 360 to 370 | °C | |
Front Temperature | 360 to 370 | °C | |
Injection Zone 4 Temperature | 360 to 370 | °C | |
Nozzle Temperature | 360 to 370 | °C | |
Processing (Melt) Temp | 360 to 370 | °C | |
Mold Temperature | 80 to 120 | °C | |
Injection Pressure | 50.0 to 150 | MPa | |
Holding Pressure | 50.0 to 150 | MPa | |
Back Pressure | <3.00 | MPa |
