| 厂家(产地)：基础创新塑料(美国) | 牌号：GTX4110 | 销售方式：品牌经销 |
| 类型：标准料 | 加工级别：注塑级 | 特性级别：阻燃级、 增强级、 耐高温 |
| 用途级别：电子电器部件、 家电部件 | 品牌：基础创新塑料 |
基础创新塑料GTX4110无卤增强PPO/尼龙66合金，无卤阻燃，10%玻纤增强，5VA级防火，高弹性模量，高延展性，尺寸稳定，高CTI(相比漏电起痕指数)。
基础创新Noryl GTX4110物性：
| TYPICAL PROPERTIES (1) | ||||
MECHANICAL | Value | Unit | Standard | |
Tensile Stress, yld, Type I, 5 mm/min | 90 | MPa | ASTM D 638 | |
Tensile Stress, brk, Type I, 5 mm/min | 83 | MPa | ASTM D 638 | |
Tensile Strain, yld, Type I, 5 mm/min | 5 | % | ASTM D 638 | |
Tensile Strain, brk, Type I, 5 mm/min | 8 | % | ASTM D 638 | |
Tensile Modulus, 5 mm/min | 4300 | MPa | ASTM D 638 | |
Flexural Stress, yld, 1.3 mm/min, 50 mm span | 145 | MPa | ASTM D 790 | |
Flexural Modulus, 1.3 mm/min, 50 mm span | 4000 | MPa | ASTM D 790 | |
Tensile Stress, yield, 5 mm/min | 90 | MPa | *** 527 | |
Tensile Stress, break, 5 mm/min | 85 | MPa | *** 527 | |
Tensile Strain, yield, 5 mm/min | 3 | % | *** 527 | |
Tensile Strain, break, 5 mm/min | 6 | % | *** 527 | |
Tensile Modulus, 1 mm/min | 4300 | MPa | *** 527 | |
Flexural Stress, yield, 2 mm/min | 145 | MPa | *** 178 | |
Flexural Modulus, 2 mm/min | 4000 | MPa | *** 178 | |
Hardness, H358/30 | 130 | MPa | *** 2039-1 | |
IMPACT | Value | Unit | Standard | |
Izod Impact, unnotched, 23°C | 587 | J/m | ASTM D 4812 | |
Izod Impact, notched, 23°C | 53 | J/m | ASTM D 256 | |
Instrumented Impact Total Energy, 23°C | 3 | J | ASTM D 3763 | |
Izod Impact, unnotched 80*10*4 +23°C | 40 | kJ/m? | *** 180/1U | |
Izod Impact, unnotched 80*10*4 -30°C | 30 | kJ/m? | *** 180/1U | |
Izod Impact, notched 80*10*4 +23°C | 13 | kJ/m? | *** 180/1A | |
Izod Impact, notched 80*10*4 -30°C | 3 | kJ/m? | *** 180/1A | |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 4 | kJ/m? | *** 179/1eA | |
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 2 | kJ/m? | *** 179/1eA | |
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm | 50 | kJ/m? | *** 179/1eU | |
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm | 35 | kJ/m? | *** 179/1eU | |
THERMAL | Value | Unit | Standard | |
Vicat Softening Temp, Rate B/50 | 220 | °C | ASTM D 1525 | |
HDT, 0.45 MPa, 3.2 mm, unannealed | 235 | °C | ASTM D 648 | |
CTE, -40°C to 40°C, flow | 5.4E-05 | 1/°C | ASTM E 831 | |
CTE, -40°C to 40°C, xflow | 9.E-05 | 1/°C | ASTM E 831 | |
CTE, 23°C to 60°C, flow | 5.5E-05 | 1/°C | *** 11359-2 | |
CTE, 23°C to 60°C, xflow | 1.E-04 | 1/°C | *** 11359-2 | |
Ball Pressure Test, 125°C +/- 2°C | Pass | - | IEC 60695-10-2 | |
Vicat Softening Temp, Rate B/50 | 230 | °C | *** 306 | |
Vicat Softening Temp, Rate B/120 | 230 | °C | *** 306 | |
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 190 | °C | *** 75/Be | |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 239 | °C | *** 75/Bf | |
Relative Temp Index, Elec | 120 | °C | UL 746B | |
Relative Temp Index, Mech w/impact | 90 | °C | UL 746B | |
Relative Temp Index, Mech w/o impact | 95 | °C | UL 746B | |
PHYSICAL | Value | Unit | Standard | |
Specific Gravity | 1.2 | - | ASTM D 792 | |
Mold Shrinkage on Tensile Bar, flow (2) (5) | 0.5 - 0.7 | % | SABIC Method | |
Mold Shrinkage, flow, 3.2 mm (5) | 0.5 - 0.7 | % | SABIC Method | |
Mold Shrinkage, xflow, 3.2 mm (5) | 0.7 - 0.9 | % | SABIC Method | |
Melt Flow Rate, 280°C/5.0 kgf | 39 | g/10 min | ASTM D 1238 | |
Density | 1.2 | g/cm? | *** 1183 | |
Water Absorption, (23°C/sat) | 4 | % | *** 62 | |
Moisture Absorption (23°C / 50% RH) | 0.8 | % | *** 62 | |
Melt Volume Rate, MVR at 280°C/2.16 kg | 9 | cm?/10 min | *** 1133 | |
ELECTRICAL | Value | Unit | Standard | |
Hot Wire Ignition {PLC) | 1 | PLC Code | UL 746A | |
High Ampere Arc Ign, surface {PLC} | 0 | PLC Code | UL 746A | |
Comparative Tracking Index (UL) {PLC} | 2 | PLC Code | UL 746A | |
Volume Resistivity | 1.2E+16 | Ohm-cm | IEC 60093 | |
Surface Resistivity, ROA | >1.E+15 | Ohm | IEC 60093 | |
Dielectric Strength, in oil, 0.8 mm | 31 | kV/mm | IEC 60243-1 | |
Dielectric Strength, in oil, 1.6 mm | 22 | kV/mm | IEC 60243-1 | |
Dielectric Strength, in oil, 3.2 mm | 16 | kV/mm | IEC 60243-1 | |
Relative Permittivity, 1 MHz | 3 | - | IEC 60250 | |
Dissipation Factor, 1 MHz | 0.018 | - | IEC 60250 | |
Comparative Tracking Index | 375 | V | IEC 60112 | |
FLAME CHARACTERISTICS | Value | Unit | Standard | |
UL Compliant, 94V-1 Flame Class Rating (3)(4) | 1 | mm | UL 94 by SABIC-IP | |
UL Compliant, 94V-0 Flame Class Rating (3)(4) | 3 | mm | UL 94 by SABIC-IP | |
UL Compliant, 94-5VA Rating (3)(4) | 2.5 | mm | UL 94 by SABIC-IP | |
UL Recognized, 94V-1 Flame Class Rating (3) | 1 | mm | UL 94 | |
UL Recognized, 94V-0 Flame Class Rating (3) | 3 | mm | UL 94 | |
UL Recognized, 94-5VA Rating (3) | 2.5 | mm | UL 94 | |
订购说明
★公司秉承“以诚为本，信誉至上”的经营宗旨，【诚信***】【服务***】【品质***】创立了自己的经营理念，在客户群树立了良好的***。为您提供充足的货源和专业的技术支持！公司所售之新料均***原厂原包，货真价实!
★公司货源充足，品种齐全，价格合理,量大从优,原厂原包,当天订货当天发货。我公司可以提供原料出厂报告(COA)，认证报告;UL认证、FDA认证、材质证明、***，ASTM物性资料、ROHS(SGS)报告、物质安全资料表(MSDS)物性、报价、UL报告、RoSH标准、SGS检测报告等）......
★支持物流，快递和货运; 支持现金，银行转账（广东省内可快递代收）.
★原料到厂后，请不要拆外包装，应先仔细检查原料的外包装是否完好及原料型号是否与您所订购原料型号相匹配。
★货物送达后，请***时间检查，发现物流过程中出现大量包装损坏及原料外漏的,请让物流人员出具证明并保存，并在24小时内与东莞佳唯斯塑胶原料有限公司颜小姐联系。
★如发货后未能及时收到，请及时与东莞佳唯斯塑胶原料有限公司颜小姐联系15382847379
★订购说明：自接到订单24小时内发货，广州市 深圳市 珠海市 汕头市 韶关市 河源市 梅州市 惠州市 汕尾市 东莞市 中山市 江门市 佛山市 阳江市 湛江市 茂名市 肇庆市 清远市 潮州市 揭阳市 云浮市等地区送货上门，广东省以外等地区协商物流配送，一次购买数量1000kg以上价格从优，欢迎各界朋友前来订购。
★我们的宗旨：【以优惠的价格给广大客户提供优质的品质。本公司货源充足，品种齐全，价格合理】
